MightyMolds

Intuitive Molds for Serious Soap & Candle Makers

Tag: soap molds

So Much Silicone – So Much Saving!!

We’ve been taking pre-orders for the last few weeks, for several different reasons. First, we wanted to have time to fulfill our first round of orders, and make sure nothing…

We’ve been taking pre-orders for the last few weeks, for several different reasons. First, we wanted to have time to fulfill our first round of orders, and make sure nothing was rushed. Second, we really needed to see what kind of demand we would have, before we could approach our silicone supplier for a new pricing structure. This meant that we had to price our molds pretty darned high in order to stay viable. But if we knew we had enough support to purchase bulk amounts of silicone at much better pricing, then we would be able to offer our products at a substantially lower rate.

Today we are pleased to announce that we have secured a temporary price reduction from our silicone supplier, until we are able to hammer out a long-term wholesale contract. As a result, we have been able to immediately slash our prices on all molds, in some cases by over half! This rate is only guaranteed for a short time and once our contract is finalized, our prices may go back up a bit, but we are hoping to keep them as close to the current structure as possible. Please note that if you have already pre-ordered a mold at the higher price, we will be in contact with you shortly to arrange a refund of the difference. We wouldn’t have been able to negotiate this reduction without the support you’ve shown us, so it’s only right that we pass the savings back on to you!

Order a mold today and be sure to take advantage of these discounted rates!

No Comments on So Much Silicone – So Much Saving!!

The Mighty March Launch Event

Over the past few months we’ve been tweaking and perfecting the Mighty Mold system, and the time is finally here! Beginning in the month of March, you’ll be able to…

Over the past few months we’ve been tweaking and perfecting the Mighty Mold system, and the time is finally here! Beginning in the month of March, you’ll be able to pre-order molds directly from our cart, and we’ll begin shipping out orders starting April 1st – no foolin’!

 

This launch marks a turning point both for our company, and for the soap and candle making communities. We asked for your support, and you answered, helping us create a mold system that we all can be truly proud of. Over the next few weeks, we will begin running polls and contests to find out what our next mold offerings will be!

 

Included in our launch event will be soap molds, such as the Tall and Skinny Loaf Soap Mold, and the Square Bar Soap Mold, both of which feature the effortless release properties of all Mighty Molds. Additionally, these molds feature innovations such as inset walls that are sure to change the way people think about loaf molds in the future. The extra wide mouth pour spout of the Square Bar Mold is especially helpful to cold process soap makers who use thicker recipes and batters, but still want to create uniform, fully formed bars straight from the mold.

 

 

 

We haven’t forgotten about candle makers in our initial releases, as we’ve included the Taper Candle Mold as well. Boasting our game-changing internal wicking system and release properties that are completely unheard of, these taper candle molds are something we are especially proud of. This particular mold in particular truly embodies the Mighty Mold mission – making candle and soap making easier, faster, and more productive than ever before!

 

Our final offering for this initial release is our Dragon Egg Mold. Easily the most versatile mold we’ve ever created, dragon eggs can now be made as both candles and soap at the exact same time, with the added bonus of being able to use the mold “open” and make half-eggs! Create fully formed, 3D dragon eggs in a single pour, or switch things up and make flat backed half-eggs that fit the hand oh-so-perfect. Regardless of what you make, the Mighty Molds Dragon Egg Mold will release your creation effortlessly, and without damaging the hard work you’ve put into it.

 

Pre-order a mold today!

 

No Comments on The Mighty March Launch Event

The Mighty Molds Dragon Egg Mold

We are proud to announce the launch of the Mighty Molds Dragon Egg Mold! This versatile silicone mold can be used to make both candles and soaps, even at the…

We are proud to announce the launch of the Mighty Molds Dragon Egg Mold! This versatile silicone mold can be used to make both candles and soaps, even at the same time! Crafted from 100% platinum cure silicone and featuring our patent pending Mighty Multiplier technology, the new Dragon Egg Mold forms completely solid, fully formed 3D dragon eggs in a single pour. Stop using hot soap to glue halves together. Stop fighting with molds that don’t want to release, or damage your soaps when they do. Take advantage of our modular mold system and get a mold tailor suited to your size and needs.

 

Aside from the fantastic mold release properties and modular size capabilities, our Dragon Egg Mold features another new surprise – open-mold half pours! These new molds can be used to form full eggs, but it can also be used “open” to create half an egg at a time! Each egg cavity is internally wicked for candle making, as well as being equipped with a slot on the pour spout that can hold acrylic stopper rings. These stopper rings block the flow of soap and cap the pour spout, keeping everything contained in the half mold. Have complete control over your mold when you use Mighty Molds!

 

Equipped with the new Mighty Mold Straps, the Dragon Egg Mold is our most user-friendly mold yet. By allowing crafters to make both candles and soaps in the same mold, along with the ability to create half-eggs, we’ve created a truly versatile mold that still boasts the amazing release properties of any Mighty Mold. Easy wicking, effortless assembly and release, and truly versatile functionality has resulted in a Dragon Egg Mold worthy of sending a raven or two about. Order yours today!

 

 

**** FOR BEST RESULTS, MAKE SURE TO PLAY VIDEO IN EITHER HD MODE – 720p OR 1080p.****

No Comments on The Mighty Molds Dragon Egg Mold

The Mighty Molds Square Bar Soap Mold

We are proud to announce the launch of the Mighty Molds Square Bar Soap Mold. This rugged soap mold works for both melt and pour soap and cold process soap,…

We are proud to announce the launch of the Mighty Molds Square Bar Soap Mold. This rugged soap mold works for both melt and pour soap and cold process soap, with extra-wide pour spouts that accommodate the thickest of bases and batters. Made with 100% platinum cure silicone that ensures an easy-release, each bar from the Square Bar Mold weighs in at a whopping eight ounces! With four bars per layer and eight ounces per bar, this premium silicone soap mold holds 32 ounces per layer, or two pounds of soap! That’s a whole loaf!

 

Who needs a soap cutter when fully formed bars with the sharpest edges in the industry can be popped right out of their mold?! In addition to sharp edges and perfectly formed corners, the Square Bar Soap Mold features our patent pending Mighty Multiplier technology, allowing for the customization of mold size. Turn a four bar mold into an eight, twelve, or sixteen bar mold! Contact us for logos, imprints, or other customization options as well!

 

With the latest addition of our Mighty Mold Straps, this new soap mold is guaranteed to exceed expectations. By bringing together rugged durability and stability capable of forming hard corners and sharp lines with the revolutionary mold release properties of the Mighty Mold system, we have created a Square Bar Mold capable of withstanding hundreds or thousands of pours while still being intuitive and easy to use. Pour your bars, pop them out of the mold, and move on. By taking the hassle out of soap making, Mighty Molds saves your day!

 

 

**** FOR BEST RESULTS, MAKE SURE TO PLAY VIDEO IN EITHER HD MODE – 720p OR 1080p.****

No Comments on The Mighty Molds Square Bar Soap Mold

The Mighty Molds Tall and Skinny Loaf Soap Mold

We are proud to announce the launch of our Tall and Skinny Loaf Soap Mold! Perfect for melt and pour soap, as well as cold process soap, this versatile soap…

We are proud to announce the launch of our Tall and Skinny Loaf Soap Mold! Perfect for melt and pour soap, as well as cold process soap, this versatile soap mold features wide open cavities that are perfect for layering, swirling, or simply just pouring soap. Each cavity holds just over two pounds of soap, and as with any Mighty Mold, the Tall and Skinny Loaf Soap Mold is fully modular, so the size is fully customizable!

 

 

 

In addition to our patent pending Mighty Multiplier technology, the Tall and Skinny Loaf Soap Mold features something completely new to the silicone soap mold world – inset walls! That’s right – we’ve actually sunk solid walls into the middle of the silicone, helping to prevent bowing and keeping those edges straight and sharp!

 

 

 

 

With the latest addition of our Mighty Mold Straps, this new addition to the loaf soap mold world is sure to deliver an impressing new experience to the savvy soaper. A simple and fast assembly process, coupled with unmatched stability and durability provides unmatched performance. And as with any Mighty Mold, the unmolding process could not be easier – the soap almost jumps out of the mold! Order yours today!

 

***If you are having problems viewing the video, trying switching browsers or clearing your cache. We’ve had reports of FireFox having issues playing the video.***

No Comments on The Mighty Molds Tall and Skinny Loaf Soap Mold

Prototype 8: Quick n’ Easy, Tall n’ Skinny Loaf Mold

We’re back from our SoapCon break with a brand new prototype, and a brand new feature: inset walls! Traditionally silicone has only been used as a liner on loaf molds,…

We’re back from our SoapCon break with a brand new prototype, and a brand new feature: inset walls! Traditionally silicone has only been used as a liner on loaf molds, because it is usually too flimsy to withstand the weight of a full loaf of soap. The silicone invariably would buckle, resulted in very odd shaped bars of soap. MightyMolds changes all of that with the introduction of inset walls into silicone loaf molds. These molds have solid plates inset into the longer wall sections, significantly increasing the strength and resiliency of the mold.

Furthermore, this mold is still 100% modular, showcasing a Mighty Multiplier that turns this single loaf mold into a double. The loaves release effortlessly, and the end result is some fine looking soap!

 

No Comments on Prototype 8: Quick n’ Easy, Tall n’ Skinny Loaf Mold

Prototype Test 6: 15 Bars – 5 Scents/Blends – 1 Mold

We’re back with our sixth prototype test – this time featuring our brand new 15 bar soap mold. This mold allows you to pour 15 4.5 ounce bars at a…

We’re back with our sixth prototype test – this time featuring our brand new 15 bar soap mold. This mold allows you to pour 15 4.5 ounce bars at a time, for a total pour weight of approximately four pounds. Pour a loaf without cutting it!! Pour 3D bars without gluing them!! Bring mass soap production to your home!

No Comments on Prototype Test 6: 15 Bars – 5 Scents/Blends – 1 Mold

Prototype Test 5: Unicorn Horns & Icicles!!

In this video we test our latest prototype, the spiral shaped unicorn horn and icicle mold. This test includes us pouring eight unicorn horns, as well as four icicles, in…

In this video we test our latest prototype, the spiral shaped unicorn horn and icicle mold. This test includes us pouring eight unicorn horns, as well as four icicles, in a single mold! It also highlights the release properties of MightyMolds, as each bar of soap releases effortlessly from the mold, including the glitter we used to decorate the soap prior to pouring.

No Comments on Prototype Test 5: Unicorn Horns & Icicles!!

Prototype 7: Bars, Bars, Bars! 15 Bars – 1 MightyMold

We’re doubling up on the prototypes this week with our second prototype release within the hour! Here is our brand new bar soap mold, equipped with enough Mighty Multipliers to…

We’re doubling up on the prototypes this week with our second prototype release within the hour! Here is our brand new bar soap mold, equipped with enough Mighty Multipliers to pour a whopping 15 bars of soap in a single mold!

 

 

 

 

 

 

 

This mold features a curved and contoured bar shape, that would normally only be achieved by “gluing” two halves together. This mold creates solid, contoured bars in a single pour!

 

 

 

 

 

 

 

Beyond that, this prototype features so many Mighty Multipliers, you can pour 15 bars at a time, in a single mold. Achieve loaf mold numbers using bar mold methods!

 

 

 

 

 

 

 

 

 

Make sure you tune for the unmolding of this one – there will be a mountain of soap on the table!

No Comments on Prototype 7: Bars, Bars, Bars! 15 Bars – 1 MightyMold

Prototype 6: The Magical Unicorn Horn!

Our latest prototype test is a good one – unicorn horns! This is a great shape for both candles and soap, that allows you to really be creative and have…

Our latest prototype test is a good one – unicorn horns! This is a great shape for both candles and soap, that allows you to really be creative and have some fun with your products. This mold includes two Multipliers, allowing you to pour 4, 8, or 12 horns at a time.

 

 

 

 

 

 

 

This shape also allows for multiple uses. Depending on the bases and accompanying decorations you choose, this mold can make candles or soaps similar to unicorn horns, seashells, icicles, and basically anything else you can come up with for a spiral shape!

 

 

 

 

 

 

We’ve already got soap setting in this one, so be sure to check back in soon for the unmolding video!

6 Comments on Prototype 6: The Magical Unicorn Horn!

Type on the field below and hit Enter/Return to search