MightyMolds

Intuitive Molds for Serious Soap & Candle Makers

Prototype 8: Quick n’ Easy, Tall n’ Skinny Loaf Mold

We’re back from our SoapCon break with a brand new prototype, and a brand new feature: inset walls! Traditionally silicone has only been used as a liner on loaf molds,…

We’re back from our SoapCon break with a brand new prototype, and a brand new feature: inset walls! Traditionally silicone has only been used as a liner on loaf molds, because it is usually too flimsy to withstand the weight of a full loaf of soap. The silicone invariably would buckle, resulted in very odd shaped bars of soap. MightyMolds changes all of that with the introduction of inset walls into silicone loaf molds. These molds have solid plates inset into the longer wall sections, significantly increasing the strength and resiliency of the mold.

Furthermore, this mold is still 100% modular, showcasing a Mighty Multiplier that turns this single loaf mold into a double. The loaves release effortlessly, and the end result is some fine looking soap!

 

No Comments on Prototype 8: Quick n’ Easy, Tall n’ Skinny Loaf Mold

MightyMolds @ SoapCon ’17

We had a wonderful opportunity this past weekend to attend and sponsor SoapCon, hosted by Soaping101’s own Cathy McGinnis in Mt. Sterling, Kentucky. Cathy owns and operates an absolutely wonderful…

We had a wonderful opportunity this past weekend to attend and sponsor SoapCon, hosted by Soaping101’s own Cathy McGinnis in Mt. Sterling, Kentucky. Cathy owns and operates an absolutely wonderful storefront in Mt. Sterling, and you can visit her web page at www.kysoapdeli.com. She also makes instructional videos that you can find on Youtube at: https://www.youtube.com/user/soaping101.

 

Cathy has hosted SoapCon for the past three years, and this year we were lucky enough to attend. Watch this short video to take a peek into SoapCon!

 

We’d like to thank everyone who came by our table in the vendor area! The feedback, ideas, and suggestions we received during SoapCon was absolutely invaluable, and we’ll make full use of them in order to make MightyMolds even better, and truly create the mold of your dreams.

 

No Comments on MightyMolds @ SoapCon ’17

Prototype Test 6: 15 Bars – 5 Scents/Blends – 1 Mold

We’re back with our sixth prototype test – this time featuring our brand new 15 bar soap mold. This mold allows you to pour 15 4.5 ounce bars at a…

We’re back with our sixth prototype test – this time featuring our brand new 15 bar soap mold. This mold allows you to pour 15 4.5 ounce bars at a time, for a total pour weight of approximately four pounds. Pour a loaf without cutting it!! Pour 3D bars without gluing them!! Bring mass soap production to your home!

No Comments on Prototype Test 6: 15 Bars – 5 Scents/Blends – 1 Mold

Prototype Test 5: Unicorn Horns & Icicles!!

In this video we test our latest prototype, the spiral shaped unicorn horn and icicle mold. This test includes us pouring eight unicorn horns, as well as four icicles, in…

In this video we test our latest prototype, the spiral shaped unicorn horn and icicle mold. This test includes us pouring eight unicorn horns, as well as four icicles, in a single mold! It also highlights the release properties of MightyMolds, as each bar of soap releases effortlessly from the mold, including the glitter we used to decorate the soap prior to pouring.

No Comments on Prototype Test 5: Unicorn Horns & Icicles!!

Prototype 7: Bars, Bars, Bars! 15 Bars – 1 MightyMold

We’re doubling up on the prototypes this week with our second prototype release within the hour! Here is our brand new bar soap mold, equipped with enough Mighty Multipliers to…

We’re doubling up on the prototypes this week with our second prototype release within the hour! Here is our brand new bar soap mold, equipped with enough Mighty Multipliers to pour a whopping 15 bars of soap in a single mold!

 

 

 

 

 

 

 

This mold features a curved and contoured bar shape, that would normally only be achieved by “gluing” two halves together. This mold creates solid, contoured bars in a single pour!

 

 

 

 

 

 

 

Beyond that, this prototype features so many Mighty Multipliers, you can pour 15 bars at a time, in a single mold. Achieve loaf mold numbers using bar mold methods!

 

 

 

 

 

 

 

 

 

Make sure you tune for the unmolding of this one – there will be a mountain of soap on the table!

No Comments on Prototype 7: Bars, Bars, Bars! 15 Bars – 1 MightyMold

Prototype 6: The Magical Unicorn Horn!

Our latest prototype test is a good one – unicorn horns! This is a great shape for both candles and soap, that allows you to really be creative and have…

Our latest prototype test is a good one – unicorn horns! This is a great shape for both candles and soap, that allows you to really be creative and have some fun with your products. This mold includes two Multipliers, allowing you to pour 4, 8, or 12 horns at a time.

 

 

 

 

 

 

 

This shape also allows for multiple uses. Depending on the bases and accompanying decorations you choose, this mold can make candles or soaps similar to unicorn horns, seashells, icicles, and basically anything else you can come up with for a spiral shape!

 

 

 

 

 

 

We’ve already got soap setting in this one, so be sure to check back in soon for the unmolding video!

7 Comments on Prototype 6: The Magical Unicorn Horn!

MightyMolds at SoapCon ’17 in Mt. Sterling, KY!

MightyMolds will be at SoapCon ’17 hosted in Mt. Sterling, KY. This is a spectacular event, and a wonderful opportunity for us to showcase our latest prototypes, and get our…

MightyMolds will be at SoapCon ’17 hosted in Mt. Sterling, KY. This is a spectacular event, and a wonderful opportunity for us to showcase our latest prototypes, and get our idea out there in front of real soaping professionals. We’ll be doing product demonstrations, talking to people about their dream molds, and even accepting some pre-orders for working prototypes! If you’d like more information on our SoapCon features, please visit http://mightymolds.com/soapcon-17-features/.

No Comments on MightyMolds at SoapCon ’17 in Mt. Sterling, KY!

Prototype Test 4: Easy Release 3-D Loaf Molds!

In our latest video update, we test our new loaf mold prototype, a triply cavity “Mini-Bread” loaf mold. This mold allows you to pour 1, 2, or 3 loaves at…

In our latest video update, we test our new loaf mold prototype, a triply cavity “Mini-Bread” loaf mold. This mold allows you to pour 1, 2, or 3 loaves at a time, and they are shaped like miniature loaves of bread. Each cavity holds approximately two pounds of soap.

No Comments on Prototype Test 4: Easy Release 3-D Loaf Molds!

Prototype 5: Loaf Molds Anyone?!

This is where it gets real, folks! The newest prototype is a triple cavity “Mini-Bread” loaf mold that allows you to pour one, two, or three loaves at a time!…

This is where it gets real, folks! The newest prototype is a triple cavity “Mini-Bread” loaf mold that allows you to pour one, two, or three loaves at a time! This prototype highlights the unprecedented functionality of MightyMolds. Traditional loaf molds are two-dimensional and often times, a real pain to work with. Wooden molds with flimsy silicone insert liners. Plastic molds with removable parts, screws, bolts, and headaches. MightyMolds change all of that.

 

 

 

The loaf mold we have created is a true three-dimensional shape, with curved edges and corners. When unmolded, these loaves will look like real, traditional loaves of bread with the mushroom top. We left the ends flat simply to facilitate cutting. Who wants unusable soap loaf caps?! Beyond this, the mold is a two-piece design, allowing for truly effortless unmolding.

 

 

 

 

 

This mold is also completely modular, meaning it can be broken down into a single mold, or more pieces can be added until you are pouring three loaves at a time. Each cavity holds approximately two pounds of soap, and the completely open pour area still allows for swirling, inserts, piping, and any other customization you may want to apply to your soap.

 

 

 

 

 

 

 

 

 

 

 

 

Share this post with your friends, and don’t forget to follow us on Facebook and Twitter! We’ve also just launched a new Facebook Group where you get to help choose the newest designs and shapes offered by MightyMolds! https://www.facebook.com/groups/MightyMolds/

4 Comments on Prototype 5: Loaf Molds Anyone?!

Prototype Test 3: Taper Candles Made Easy

We’re back with our third prototype test! This time we test our latest prototype, a 12 taper candle mold. By using a Mighty Mold with two Mighty Multipliers, we have…

We’re back with our third prototype test! This time we test our latest prototype, a 12 taper candle mold. By using a Mighty Mold with two Mighty Multipliers, we have been able to pour 12 taper candles in a single candle mold. Beyond that – they unmold easier than any taper candle mold seen before! Check out this video!

2 Comments on Prototype Test 3: Taper Candles Made Easy

Type on the field below and hit Enter/Return to search